When installing your fence, there are many different things to know. The materials you need, the cost, and the time frame. This infographic will help you prepare yourself for the big day. It will walk you through each step so that you can feel confident that you’re in good hands.
Building a Fence
You might not have known some fundamentals of building a fence, just like fence installation Lake County IL. The first step is to dig a post hole. It should be a depth of one-third to one-half the height of the post. In other words, a six-foot post would require a hole of two feet deep. Dig the hole carefully, ensuring you don’t hit any pipes or utility lines.
Staking property lines is another crucial step to take when building a fence. Without proper boundary surveys, you could run into legal trouble. Many townships require that you set the fence back from the property line.
Materials for Building a Fence
When constructing a fence, it is essential to choose suitable materials. Wood boards, in particular, should be treated to prevent decay and the bark beetle, which can spoil wood quickly. While an ordinary shovel can sometimes work, a grinder or hatchet will produce a better result. Another option is to hire a sawmill to process the wood. However, this is more expensive than building a fence, so do it only when you are confident in your skills.
If you are unsure about the quality of the wood, you can purchase profiles from a fencing manufacturer. The ideal thickness for a fence sheet is between 0.4 and 0.7 mm, and the board should weigh between 140 and 180 grams per m. However, experts advise against going below these parameters. While a thicker corrugated board may look more stylish, it will not increase the structural strength of the fence.
Cost of Installing a Fence
The cost of installing a fence varies depending on the type of materials and the region you live in. It can also be higher if the site is not flat and requires a lot of excavation. For these reasons, you should check with your local utility company to determine what you can expect to spend on the project.
Building permits for most types of fences are required. Depending on your chosen material, they cost between EUR39 and $150 per linear meter. In addition, you may be required to provide a survey of the land you are planning to fence. This survey is essential to find utility lines before you begin digging. A land survey will also ensure that the fence is correctly located on your property.
The Time Frame for Installing a Fence
The time frame for installing a fence will depend on several factors. The length of the project will vary depending on the type of fence, its materials, and the size of the yard. An average-size yard will require between two to four days of work, but larger projects can take much longer.
It is essential to plan a timeline before the installation begins. It is also important to determine where underground utility lines are located. For example, if a fence is constructed over existing utilities, these lines must be marked and buried 48 hours before installation.
Common Problems with Installing a Fence
When installing a fence, you must be aware of some of the common problems you might encounter. For instance, improperly-dug post holes can result in the fence not aligning correctly and could weaken it. Also, concrete fence posts may rot or be affected by water seeping into the ground.
First, contacting the utility company before digging the posts is essential. You never know when you’ll be installing a fence on utility lines. This could cause severe problems if you accidentally hit or break one of the lines. To prevent this problem, make sure the contractor you hire is insured.
Second, make sure you know the rules for building in your neighborhood. For example, some communities have specific rules for installing fences. In addition, some areas require a land survey before making anything.
Leave a Reply
You must be logged in to post a comment.