The asphalt driveway paving process is one of the most common masonry techniques. Asphalt is typically laid at a lower temperature than concrete. This is because asphalt is a relatively soft material, and a higher temperature causes it to be harder to compact. However, the temperatures at which asphalt is laid also affect the compaction process. Therefore, the mix temperature should be selected carefully to support the roller behind the paver. Larger rollers are required for the compaction process, and the mix temperature must be high enough to keep the roller.
Before hiring professional driveway pavers South Bend IN, you should clearly know how much asphalt driveway paving costs. Depending on the size of your driveway, asphalt installation can cost several thousand dollars. The cost of asphalt driveway installation will also depend on the paving material you decide to use. Homeowners can either complete the demolition process on their own or hire a contractor to do it. To get the best value, do some research.
The cost of asphalt driveway paving depends on several factors, including the size of the area and the desired style. Another factor is the thickness of the asphalt, which can range from three to six inches. The thickness of the asphalt will also depend on the base materials used and the weight of heavy equipment that needs to be moved across the surface.
Before applying asphalt, a sub-base must be laid to protect the existing concrete or asphalt. It also serves as a solid foundation for new paving materials. This is a critical step in the asphalt paving process because it is essential for the finished product to last. First, a concrete sub-base is created by grading the soil so it slopes toward grassy areas to prevent water from sitting on top of the finished asphalt.
Once the sub-base layer is laid, the contractor will apply the sub-base layer, a load-bearing layer of aggregate materials. Usually, more than half of this layer is composed of crushed stones. Afterward, a binder layer will be applied over the sub-base layer, containing the bitumen, oil, and other binding materials. Finally, a proof layer is added to the asphalt to detect any.
Costs Based on Location
The cost of asphalt driveway paving varies based on location and features. The cost of applying asphalt to a driveway typically runs between $2.00 and $7.00 per square foot, depending on the region, asphalt type, and thickness of the application. Other factors to consider include the amount of area to be covered, the size of the driveway, and the labor involved. Some general guidelines help determine the cost of paving your driveway.
The distance from the asphalt plant and gravel pit to the home site varies. The distance to the site is 12 miles and 25 miles, respectively.
Costs Compared to Sealcoating
Asphalt driveway paving costs can be hard to determine the difference between the two options. Generally, asphalt driveways will last between ten and thirty years, depending on the location and specific services needed. However, asphalt driveway paving is usually more expensive than seal coating and may be necessary if your current driveway is cracked or old. With regular maintenance, asphalt driveways can last anywhere from fifteen to twenty years with proper care.
While seal coating is a good option for minor cracks and blemishes, it is not as effective at protecting your driveway from damage. Sealcoating should be done by a professional since sealing isn’t possible without proper preparation. There are different types of asphalt seal coating, and a professional should be able to tell you which one is best for your driveway.
Leave a Reply